for Tuesday, 2nd December

The two sections you are to concentrate on this week are:

Planning of Making


PLANNING OF MAKING

Write down what you have to do to make it. Do this in the form of a table with the different processes involved (for example, drawing, colour, cutting out) and put in the order you are to do them in. Have boxes on the right so you can tick off when you have done them. Include how long each process will take.

Have columns (going from left to right):


to be done / materials needed / time needed / done


I shall be collecting in folders (on Wednesday 3rd December)for a last mark before you go on study leave.PLEASE MAKE SURE THAT THE SHEETS I HAVE WRITTEN COMMENTS ON ARE IN THERE. THANK YOU!

Thank you,
Mr. Bower

Homework for Tuesday 18th November

Please make sure that, by Tuesday 18th November, you have the following done and dusted:

Enough designs (see the printed sheets for information).

Developments of the clock designs (see information on the printed sheets).

Working Drawing (done with a ruler, 3RD Angle Orthographic projection (see link here for an example), with dimensions... that is, measurements.)

Plan of Making (see the printed sheet for information). This should include at least the following:

Draw the clock parts in 2D Design
Adapt the DVD cover so that it can be used on the clock face
Copy and paste the DVD cover artwork onto the drawing in 2D Design of the clock face
Print out the design
Paste the A3 paper onto card
Cut out the parts
Slot together and/or join the parts

thank you,
Mr. Bower